2.1 (latest)

Configuring Thanos (Deprecated)

As of Kubecost v2.0, support for Thanos is deprecated. Consider transitioning to our Aggregator architecture if you plan to upgrade.
This feature is only offically available on Kubecost Enterprise plans.
Kubecost leverages Thanos and durable storage for three different purposes:
  1. 1.
    Centralize metric data for a global multi-cluster view into Kubernetes costs via a Prometheus sidecar
  2. 2.
    Allow for unlimited data retention
  3. 3.
    Backup Kubecost ETL data
To enable Thanos, follow these steps:

Step 1: Create object-store.yaml

This step creates the object-store.yaml file that contains your durable storage target (e.g. GCS, S3, etc.) configuration and access credentials. The details of this file are documented thoroughly in Thanos documentation.
We have guides for using cloud-native storage for the largest cloud providers. Other providers can be similarly configured.
Use the appropriate guide for your cloud provider:

Step 2: Create object-store secret

Create a secret with the .yaml file generated in the previous step:
kubectl create secret generic kubecost-thanos -n kubecost --from-file=./object-store.yaml

Step 3: Unique Cluster ID

Each cluster needs to be labelled with a unique Cluster ID, which is done in two places.
clusterName: kubecostProductConfigs_clusterName
cluster_id: kubecostProductConfigs_clusterName

Step 4: Deploying Kubecost with Thanos

The Thanos subchart includes thanos-bucket, thanos-query, thanos-store, thanos-compact, and service discovery for thanos-sidecar. These components are recommended when deploying Thanos on the primary cluster.
These values can be adjusted under the thanos block in values-thanos.yaml.
helm upgrade kubecost kubecost/cost-analyzer \
--install \
--namespace kubecost \
-f https://raw.githubusercontent.com/kubecost/cost-analyzer-helm-chart/master/cost-analyzer/values-thanos.yaml \
-f values-clusterName.yaml
The thanos-store container is configured to request 2.5GB memory, this may be reduced for smaller deployments. thanos-store is only used on the primary Kubecost cluster.
To verify installation, check to see all Pods are in a READY state. View Pod logs for more detail and see common troubleshooting steps below.


Thanos sends data to the bucket every 2 hours. Once 2 hours have passed, logs should indicate if data has been sent successfully or not.
You can monitor the logs with:
kubectl logs --namespace kubecost -l app=prometheus -l component=server --prefix=true --container thanos-sidecar --tail=-1 | grep uploaded
Monitoring logs this way should return results like this:
[pod/kubecost-prometheus-server-xxx/thanos-sidecar] level=debug ts=2022-06-09T13:00:10.084904136Z caller=objstore.go:206 msg="uploaded file" from=/data/thanos/upload/BUCKETID/chunks/000001 dst=BUCKETID/chunks/000001 bucket="tracing: kc-thanos-store"
As an aside, you can validate the Prometheus metrics are all configured with correct cluster names with:
kubectl logs --namespace kubecost -l app=prometheus -l component=server --prefix=true --container thanos-sidecar --tail=-1 | grep external_labels
To troubleshoot the IAM Role Attached to the serviceaccount, you can create a Pod using the same service account used by the thanos-sidecar (default is kubecost-prometheus-server):
apiVersion: v1
kind: Pod
run: s3-pod
name: s3-pod
serviceAccountName: kubecost-prometheus-server
- image: amazon/aws-cli
name: my-aws-cli
command: ['sleep', '500']
kubectl apply -f s3-pod.yaml
kubectl exec -i -t s3-pod -- aws s3 ls s3://kc-thanos-store
This should return a list of objects (or at least not give a permission error).

Cluster not writing data to thanos bucket

If a cluster is not successfully writing data to the bucket, review thanos-sidecar logs with the following command:
kubectl logs kubecost-prometheus-server-<your-pod-id> -n kubecost -c thanos-sidecar
Logs in the following format are evidence of a successful bucket write:
level=debug ts=2019-12-20T20:38:32.288251067Z caller=objstore.go:91 msg="uploaded file" from=/data/thanos/upload/BUCKET-ID/meta.json dst=debug/metas/BUCKET-ID.json bucket=kc-thanos

Stores not listed at the /stores endpoint

If thanos-query can't connect to both the sidecar and the store, you may want to directly specify the store gRPC service address instead of using DNS discovery (the default). You can quickly test if this is the issue by running:
kubectl edit deployment kubecost-thanos-query -n kubecost
and adding
to the container args. This will cause a query restart and you can visit /stores again to see if the store has been added.
If it has, you'll want to use these addresses instead of DNS more permanently by setting .Values.thanos.query.stores in values-thanos.yaml.
enabled: true
grpcSeriesMaxConcurrency: 20
blockSyncConcurrency: 20
- name: GOGC
value: "100"
memory: "2.5Gi"
enabled: true
timeout: 3m
# Maximum number of queries processed concurrently by query node.
maxConcurrent: 8
# Maximum number of select requests made concurrently per a query.
maxConcurrentSelect: 2
memory: "2.5Gi"
autoDownsampling: false
- name: GOGC
value: "100"
- "kubecost-thanos-store-grpc.kubecost:10901"

Additional Troubleshooting

A common error is as follows, which means you do not have the correct access to the supplied bucket:
[email protected] does not have storage.objects.list access to thanos-bucket., forbidden"
Assuming pods are running, use port forwarding to connect to the thanos-query-http endpoint:
kubectl port-forward svc/kubecost-thanos-query-http 8080:10902 --namespace kubecost
Then navigate to http://localhost:8080 in your browser. This page should look very similar to the Prometheus console.
Thanos query editor
If you navigate to Stores using the top navigation bar, you should be able to see the status of both the thanos-store and thanos-sidecar which accompanied the Prometheus server:
Thanos stores
Also note that the sidecar should identify with the unique cluster_id provided in your values.yaml in the previous step. Default value is cluster-one.
The default retention period for when data is moved into the object storage is currently 2h. This configuration is based on Thanos suggested values. By default, it will be 2 hours before data is written to the provided bucket.
Instead of waiting 2h to ensure that Thanos was configured correctly, the default log level for the Thanos workloads is debug (it's very light logging even on debug). You can get logs for the thanos-sidecar, which is part of the prometheus-server Pod, and thanos-store. The logs should give you a clear indication of whether or not there was a problem consuming the secret and what the issue is. For more on Thanos architecture, view this resource.